Release notes
Meter Core 0.7.17
- LIVE view: LUFS-M, LUFS-S and LRA now show alongside LUFS-I, plus MAX M and MAX S, the highest momentary and short-term loudness since RESET.
- Help text: updated for these readings. LUFS-S no longer asks “or is it just brighter?”. LRA says “too quiet to measure” when the audio is too quiet.
- The new readings were checked against the EBU’s published test signals (Tech 3341 and Tech 3342), on the processor in a test harness.
- Existing readings and CSV exports are unchanged.
- Windows: Setup stops while Meter Core is in use. Close your music app, then run Setup again; Setup never closes it for you.
Meter Core 0.7.16
- Clearer help text: TRUE PEAK is described as an estimate of the input; the LUFS-I help no longer gives advice; the RESET tip is corrected; the Guide matches the readings shown.
- Settings menu: "Open Meter Core page" now opens the Meter Core page, plus links to how LOW, TOP and PUNCH are measured and to the accuracy page.
- Measurements and CSV exports are unchanged.
Meter Core 0.7.15
- New look: the Pastel interface, light and dark, with all text at 14 px or larger.
- VU meters now follow the standard VU response (about 300 ms), instead of settling slowly.
- Live averaging: LOW, TOP and PUNCH can show LIVE, 1 s or 3 s windows.
- A/B slots: store two Track Passes and compare them side by side with the current one.
- WEIGHT now starts at K-14.
- HEADROOM's HOT warning holds for 2 s, like CLIP.
- RESET now clears the display even when playback is stopped.
- Measurements and CSV exports are unchanged.
Meter Core 0.7.13
Fixed: HEADROOM could miss short sample overs and failed to flag intersample overs. It now shows CLIP above 0 dBFS or 0 dBTP and holds the warning for two seconds of audio after the latest over. RESET clears it; RESET PASS preserves it.